PC-501 Single Channel Clamp Amplifier Patch Warner Cell 3U

( Part Type: Instrument Clamp Amplifier Patch Cell )

Review Instruments Single channel Clamp Amplifier 3u Patch Warner Cell

The PC-501 Single-Channel Clamp Amplifier 3U Patch Warner Cell is a robust and versatile instrument designed for professionals in the field of electrical and electronic engineering. This device is a 3U high, single-channel clamp amplifier, making it a space-saving solution for your laboratory or testing station.

The PC-501 is equipped with a wide input voltage range of -20V to 20V, allowing it to handle a broad spectrum of electrical signals. The amplifier features a high common-mode rejection ratio (CMRR) of 90dB, ensuring that it accurately amplifies signals without being affected by common-mode noise.

The PC-501 also boasts a high input impedance of 10M , which helps to minimize loading effects on the signal source. The output of the amplifier is adjustable from 0 to 10V, allowing you to tailor the output level to your specific needs.

One of the standout features of the PC-501 is its automatic range change function. This feature allows the amplifier to automatically switch to a higher gain range when the input signal exceeds the current gain range, ensuring that you always get an accurate and full-scale output.

The PC-501 Single-Channel Clamp Amplifier 3U Patch Warner Cell is designed with ease of use in mind. It features a front-panel display that shows the input voltage, output voltage, and gain settings, making it easy to monitor the amplifier's operation. The amplifier also has a built-in 100Hz low-pass filter, which helps to remove high-frequency noise from the signal.

The PC-501 is housed in a rugged, 19" wide, 1U high chassis, making it easy to integrate into any 19" rack system. The device is also equipped with a patch panel, which allows you to easily connect multiple devices in a patch bay configuration.

In summary, the PC-501 Single-Channel Clamp Amplifier 3U Patch Warner Cell is a high-performance, space-saving solution for professionals in electrical and electronic engineering. Its wide input voltage range, high CMRR, and automatic range change function make it an accurate and reliable instrument for signal amplification. Its front-panel display, built-in filter, and rugged chassis make it easy to use and integrate into any laboratory or testing station.

1. Single-channel design: The PC-501 is a single-channel clamp amplifier, which means it can only measure one signal at a time. However, this simplicity can make it easier to use and less expensive than multi-channel amplifiers.

2. 3U rack mounting: The 3U size of the PC-501 makes it compatible with standard 19-inch racks, allowing it to be easily integrated into existing laboratory or measurement systems.

3. High voltage and current capacity: The PC-501 has a voltage range of up to 500V and a current capacity of up to 1A, making it suitable for measuring high-voltage and high-current signals.

4. Programmable triggering and output settings: The PC-501 has programmable triggering and output settings, allowing users to customize its operation to fit their specific measurement needs.

1. Limited channel capacity: As a single-channel amplifier, the PC-501 cannot measure multiple signals simultaneously, which may limit its usefulness in applications that require parallel measurement of multiple signals.

2. Potential compatibility issues: The PC-501 may not be compatible with all measurement systems or software, so it is important to check for compatibility before making a purchase.

3. Limited input and output options: The PC-501 has only one input and one output, which may limit its versatility in applications that require multiple input or output channels.

The PC-501 single-channel clamp amplifier is a useful tool for measuring high-voltage and high-current signals in laboratory or measurement applications. Its 3U rack mounting and programmable triggering and output settings make it easy to integrate into existing systems, and its high voltage and current capacity make it suitable for a wide range of applications. However, its limited channel capacity and potential compatibility issues may make it less suitable for applications that require parallel measurement of multiple signals or integration with specific measurement systems or software.

If you need to measure high-voltage and high-current signals in a lab or measurement application, the PC-501 single-channel clamp amplifier is a good option to consider. However, it is important to check for compatibility with your measurement system or software before making a purchase. If you need to measure multiple signals simultaneously, you may want to consider a multi-channel amplifier instead.

Details:

Shipping method standard shipping weight in lbs if you accidentally peel the top plastic off, exposing the foam, just look for the next layer of plastic to lift the foam out cleanly. Save packaging for carrier claim.

30 day DOA warranty this product carries a 30 day DOA warranty. This unit has been used. See photos.

Warner instruments pc 501 whole cell single channel patch clamp amplifier 3u JV Levi b warnerpc501 condition used packaging oem warranty 30 day DOA warranty this offer only comes with what is pictured or listed in the.

Cash is only accepted for will calls.

Minimum handling charge is 75 onto a standard pallet and increases for custom pallet's. length in inches are only included if pictured or listed in.

All parts, accessories, cables, etc.

Do not lift up on the top plastic sheet or it'll make a mess. Standard shipping prices are only good for the lower 48 states.

All parts, including accessories and cables are only included if pictured or listed in the. DOA stands for dead on arrival, meaning that the item did not function properly when it arrived.

Your satisfaction is extremely important to us.

Compatibility issues are not considered DOA.

On a scale from, with 10 being in new or excellent condition, this item is rated as a 7.

All pictures are taken in house. Please by sending a message through or calling.

If you do receive the package, submit clear images of the packaging box and damaged item from multiple angles. If in doubt, please before purchasing. Please review images thoroughly before purchasing.

Our contact SC asset management, inc.

USPS or ups ground.

Do not discard the packaging. Lift foam out of box by grabbing 2nd plastic sheet from both sides.

part #: pc-501 prices

• $72.89-$160.00

General:

• condition: Used
• Business & Industrial > Healthcare, Lab & Life Science > Lab Equipment > Analytical Instruments
• in stock: Yes

Payments:

• VisaMC
• AmEx
• PayPal
• Discover

Seller:

• city: Milpitas, California
• zipcode: 95035

Ratings:

1. This order was filled quickly and packaged very well. Delivery was appreciated. 02-28-15
2. A+++ Seller. Perfect transaction. Great packaging. Thank you. 02-28-15
3. Prompt processing and communication. Negotiable prices and value. 02-28-15
4. As described, well packed, prompt shipment. 02-28-15
5. received item - no problems 02-28-15

Shipping:

• type: Calculated
• handling: 1 days

Returns:

• policy: returns accepted
• paid by: Buyer
• time: 30 Days
• type: Money back or exchange buyer's choice
• details: 30 Day DOA Warranty, except for AS-IS ITEMS which are all Final Sale.

Offer:

• # bids: 0
• quantity: 1
• # Sold: 0
• Started: February 28, 2015, 5:25 am
• best offer: true

PC-501 Is Similar To:

• 523927 Beckman Instruments Calibration Cell (35.1% similar) Please look at the pictures for exact cosmetic condition or call us examine. Please through messages to get a quote. This item is in full working condition with normal wear. Exactly what is pictured included. Item condition: this is tested and fully functional. Feel free to call us at or contact ...(February 21st, 2018)
• 200b Axon Instruments Axopatch Integrated Patch Clamp (33.9% similar) Lowest price on. Axon instruments expat 200B integrated patch clamp in super clean excellent condition...(December 21st, 2015)
• Geneclamp 500 Axon Instruments Voltage Patch Clamp (46.3% similar) Unit shown partial characters as got dents on it. Make sure to view all 12 pix unit being sold as pictured. Make sure to view all 12 pix no power cord accessories. You should accept the above-mentioned and bid. Got scratches on it. If any questions, please before purchasing. I'm not familiar with ...(February 26th, 2018)
• Rps312 P122 P511 Grass Instruments Astro-med Rm Power Supply W 2 Strain Gage 2 Ac Amplifier (29.6% similar) Includes the power cord but no other accessories. These pieces are often used but in good working condition. It has a RPS312 rm power supply. Astor med grass RPS312 rm power supply w 2 P122 strain Gage 2 P511 ac amplifier offered here is a used Astor med grass unit. In most cases these pieces come ...(September 9th, 2016)
• 3600i Michigan Instruments Single Lung Pneuview Training Test W Case New (30.8% similar) Original price was over 9,000 comes with everything pictured...(June 24th, 2016)
• Qp511 Grass Instruments Instrument Quad Amplifier System (34.6% similar) Amplifier system. Comes as pictured with no power supply but in great working condition. Grass instrument QP511 quad...(June 5th, 2018)
• Micro96 Skatron Instruments Harvester Simultaneous Cell Harvesting Micro 96 (28.8% similar) Pressing the start switch caused the display to indicate that there was no plate in lift. Ska tron micro 96 harvester specifications harvest form micro plates 8 x 12 filter format configuration 6 x 16 filtering area 9MM number of outlet's 1 hot, 1 cold number of inlet's 3 we powered this device on ...(July 14th, 2016)
• Bps-2 Warner Instruments Sunstir 3 Bilayer Perfusion System (38.5% similar) Warner instruments sun stir 3 bi layer perfusion system bps...(November 4th, 2015)